I finally fixed my airbag code issue! I found a guy selling a 92 - 93 airbag diagnostic monitor that he fixed - he puts in new capacitors and a new thermal fuse. It was a tedious job getting the old one out but the repaired unit worked perfectly! This is the first time in a few years that I do not h...

I'm still in the process of rebuilding mine. Finally drove it for the first time while taking it to storage. Car idles perfectly fine. When I hit about 59-61mph, the engine seemed to lose power. So I kept it about 58mph and it would drive fine. What am I looking at? New fuel pump, fuel filter? I ha...

I just finished the biggest step of all - new fuel injectors. I used the Ford Racing 24 lb/hr with the EV6 style connector (used the adapter to connect the stock wiring harness). This necessitated a 3/8" intake spacer for clearance. I pulled the upper intake, no problems. I then pulled the stoc...

That's horrible Brent. Can't believe they're charging that much for that poor of quality. Sent from my SAMSUNG-SM-N900A using Tapatalk Yeah. To be fair to the shop, they seem like they honestly thought they were selling me painted lenses, and the guy responded right away when I sent him an email th...

Me too... man I was fucking hot when I opened the package and saw the taped lines, even so bad as to see they had bubbles in the tape. I am a bit calmer today but it still annoys me. Why doesn't a company like Carpenter do the things the right way? If Ford could do it, they should be able to. Total...

^^^ Uh oh. Were these lenses too good to be true? Sorry to see my question was correct. Me too... man I was fucking hot when I opened the package and saw the taped lines, even so bad as to see they had bubbles in the tape. I am a bit calmer today but it still annoys me. Why doesn't a company like C...

Well, Joel at the vendor sent me an email. He is contacting Daniel Carpenter to find out what is up. He seems confident that they have been selling painted ones before and that this is some sort of mixup. I will let you guys know what he finds out when he tells me. It looks like they are going to be...

Bad news! I received the lenses last night, and they are the same Daniel Carpenter units with the shitty tape stripes including the stupid one that is too long and goes over the area with the light bulb. I am seriously bummed out and pissed off. Waited forever for the pieces of shit and they sent me...

tjsbeer wrote:

BrentE wrote:

tjsbeer wrote:The good news is my card was never charged for the lenses.

Have you received a notice that yours are on the way?

I cancelled the order.

Sent from my SAMSUNG-SM-N900A using Tapatalk

Understand, I'll get some photos up once I have mine and you can see what they are about.

tjsbeer wrote:The good news is my card was never charged for the lenses.

Have you received a notice that yours are on the way?

IMO you should stay with the stock amber lights. X2. The clears look wrong IMO. X3. Never really cared for clear corners. Clear corners rank right up there with underglow, fart canons, and quadruple decker wings in my book. You drive a modern classic, keep it that way...classic. Agreed... But WTF i...

I received an email today showing that a shipment is on the way from this vendor, and they charged my debit card. I should have the lenses by 3/1/16. I will update once I have them and take a couple of photos.

Thanks! Sounds like it would be a waste for me.

Nobody has experience with the aftermarket MAF sensors? Any help is appreciated...

^^^ Uh oh. Were these lenses too good to be true? No, the guy at the shop said they normally have them in stock, and usually get their orders from Daniel Carpenter quickly. He said that the delay is unusual. If Carpenter held them back because of a quality issue, and the new batch is better, I am O...