Alright, guys/gals,
I have started back on my project. I have a 93 cobra that was built to race. I am taking it down to be a daily driver with a little umph. I put it together a few months back and got this weird ticking/tapping sound. I just couldn't figure it out. So I purchase another short block. I am about to put it together, I pulled the original cobra cam from the block and notices some wear patterns as well as a nick on it. Would you guys use this cam or not. I don't wanna purchase a new cam. I have a stock gt cam I could use but wondering what you guys would do.. Would that nick in the cam cause a tapping sound? The nick is in the first pic.
cam question
Moderators: 93Cobra#2771, SPEEDFREEK, 1993cobra
-
- Posts: 62
- Joined: Tue Mar 18, 2014 10:45 pm
- 1993cobra
- Site Admin
- Posts: 4537
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Texas of course!
- Contact:
Re: cam question
I would not use that cam at all, it will looks like it's about to go flat, what do the lifters look like? Can are relatively cheap, I wouldn't skimp on it. You are using rollers on it right?
-
- Posts: 32
- Joined: Thu Oct 15, 2015 8:32 am
Re: cam question
I agree. I would not re-use that cam. Even without the nick, just considering the wear alone I would think it's done for.
robj
robj
1993 Cobra # 613