Page 1 of 2

Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 1:03 am
by Dixie789456
What do y'all recommend since we have to use mafs specific to our computer... so far all I see is pro m 75mm and granatelli 90mm :(

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 8:41 am
by escogt
Pro M has an 80mm & 92mm as well for the '93 Cobra. Pro M is what I'd recommend.

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 9:09 am
by Z282SLO
escogt wrote:Pro M has an 80mm & 90mm as well for the '93 Cobra. Pro M is what I'd recommend.
Excellent recommendation. I'm using an 80mm MAF. Works great.

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 9:10 am
by BrettT
X2 ^^^ on both comments


Sent from my iPhone using Tapatalk

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 9:35 am
by Dixie789456
Thanks! Will look for an 80mm pro m!

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 9:48 am
by Dixie789456
Well looking at the big ass bell mouth flange on the pro m 80mm, looks like it won't be small enough to be used with the vortech airbox? I am running that right now and don't plan on using a power pipe or really upping the boost. Just need something more efficient than stock?

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 10:08 am
by Dixie789456
Would the 75mm still be a good step up from stock since I can fit it in the stock location and have it calibrated for a supercharger? I am only running 5-6 psi and don't plan on upping that at all.

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 10:19 am
by escogt
Dixie789456 wrote:Would the 75mm still be a good step up from stock since I can fit it in the stock location and have it calibrated for a supercharger? I am only running 5-6 psi and don't plan on upping that at all.
I would say yes to this. Today's MAF's are a step up from the 20 year old technology MAF's like those in the '93 Cobra.

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 10:24 am
by BrettT
escogt wrote:
Dixie789456 wrote:I am only running 5-6 psi and don't plan on upping that at all.

If your only running 5-6psi.

IMO, I would save the money and keep the stock mass air on. Your not going to gain or benefit from anything bigger.


Sent from my iPhone using Tapatalk

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 12:56 pm
by Z282SLO
BrettT wrote:IMO, I would save the money and keep the stock mass air on. Your not going to gain or benefit from anything bigger.
X2 considering the mild set-up you're running.

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 2:01 pm
by Dixie789456
Ok thanks! Yeah it runs really well right now... even better than when I got it and it was all stock :nutkck: I guess installing 3.73's in it this week will give it all the extra bump I need :wink: no need to install parts the may or may not make any difference.

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 2:03 pm
by BrettT
Does the car have a tune?


Sent from my iPhone using Tapatalk

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 2:04 pm
by Dixie789456
Maybe an aluminum driveshaft would be a better buy since I get slight vibes at higher speeds and rpms out of my stock one?

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 2:05 pm
by Dixie789456
BrettT wrote:Does the car have a tune?


Sent from my iPhone using Tapatalk
No tune, just running fmu, 155lph pump, and sp505 plugs gapped to .035.

Re: Looking to upgrade maf on supercharged cobra...

Posted: Sat Oct 24, 2015 2:09 pm
by Z282SLO
Dixie789456 wrote:I guess installing 3.73's in it this week will give it all the extra bump I need :wink:
Shorter rear gears are without a doubt one of the best bang for the buck (and noticeable) mods for a Fox body Mustang.