1993 cobra cam specs
Posted: Mon Aug 06, 2007 8:38 am
If I'm not mistaken the 93 cobra engine came with an upgraded cam different from the cam in the regualr 5.0L engine. Does anyone know the specs on this cam?
this is what it says on the 93 cobra website for stats of the 93 cobra.
Ford designed a new camshaft grind to bring back some of the low end torque that was now lost using these higher flowing cylinder heads. Part number for the cam is F3ZE-6250-CA. Specs are as follows:
Intake/Exhaust duration in degrees of crankshaft rotation: 270/270 and at 0.050 lift 209/209
Intake/Exhaust lift at valve with 1.7 rocker ratio: 0.479/0.479"
Lobe separation is 118.3 degrees with 115 intake lobe center and a 121.5 exhaust lobe center.
Timing events at 0.050 lift are:
Intake: (BTDC):-10.5 / (ABDC): 39.5
Exhaust: (BBDC): 46.0 / (ATDC): -17.0